EN
TR · EN
Empo Aluminium
Product Details
EN AW 5754 EN AW 5754

EN AW 5754 as it is an alloy that has, among other properties, a very good welding and anodizing, perfect corrosion-resistance, and superiority in cold-forming; it is used almost in every field of each industry.

General Properties

  • Tread or rolled surface
  • Foiled on both sides
  • Excellent corrosion resistance
  • Very good weldability
  • Very good anodizing

Typical Fields of Application

  • Fuel tanks
  • Bus doors and luggage compartment covers
  • Ship and yacht building
  • Automotive industry
  • Chemical production area
  • Heat shields

For more information → Technical Data Sheet

CHARACTERISTICS OF ALLOY
Alloy EN AW 5754 (AlMg3), DIN EN 573-3 / 3.3535
Type of Alloy Non heat treatable
Temper H111 / H22
PROCESSING CHARACTERISTICS
Machinability Very Good
Weldability (Gas/TIG/MIG) Good/Very Good/Very Good
Anodizing (Not Decorative) Very Good
Polishability Good
Erodibility Good
Corrosion Resistance (Sea Water/Weather) Very Good/Very Good
Contact With Food Yes (according to EN 602)
MECHANICAL PROPERTIES H111                                              H22
Yield Strength Rp0,2 80-90 MPa                                    130-150 MPa
Tensile Strength Rm 190-240 MPa                                220-270 MPa
Elongation A50 14-18 %                                          8-11 %
Brinell Hardness 50-54 HB                                        60-66 HB
PHYSICAL PROPERTIES
Density 2,67 g/cm³
Modul of Elasticity 70,000 N/mm²
Electrical Conductivity 19-21 m/Ω.mm²
Thermal Conductivity 130-150 W/m.K
Coefficient of Thermal Expansion 23,7 K-1.10-6
Spesific Heat Capacity 900 J/kg.K
TOLERANCES
Thickness (mm) EN 485-3 
Width & Length (mm) EN 485-3 
STANDART STOCK SIZES
Width x Length (mm) (1000x2000)  (1250x2500)  (1500x3000)
Flat Sheets Thickness (mm) 0,30min – 3,00max 
Tread Sheets Thickness (mm) 1,20min – 3,00max 
For non standart sizes please contact us.
EN AW 5754 Brochure
PDF
1.84 Mb.