EN
TR · EN
Empo Aluminium
Product Details
EmpAL 5754 EmpAL 5754

EmpAL 5754 reduces time and process cost minimum by removing risk of distortion and pitching during processing thanks to its perfect grain structure, minimum micro porosity, and easy processing ability. With its excellent anodizing property, it provides standard and perfect visual results for the parts that will be anodized after being processed.

General Properties

  • Six sides sawed surface
  • Stress relieved
  • Very homogeneous
  • Very fine grain stucture and minimum micro porosity
  • Excellent anodizing
  • Excellent visual aesthetics with anodizing and surface treatments

Typical Fields of Application

  • Facade and architecture
  • Moulds and tools
  • Medical and electronics industry
  • Visual aesthetic required components
  • Food and packaging machines

For more information → Technical Data Sheet

CHARACTERISTICS OF ALLOY
Alloy EN AW 5754 (AlMg3), DIN EN 573-3 / 3.3535
Type of Alloy Non heat treatable
Temper H0 (Homogenised & Stress relieved)
PROCESSING CHARACTERISTICS
Machinability Very Good
Dimensional Stability Very Good
Weldability (Gas/TIG/MIG) Good/Very Good/Very Good
Anodizing (Not Decorative) Very Good
Polishability Good
Erodibility Good
Corrosion Resistance (Sea Water/Weather) Very Good/Very Good
Contact With Food Yes (according to EN 602)
MECHANICAL PROPERTIES
Yield Strength Rp0,2 72-85 MPa
Tensile Strength Rm 180-220 MPa
Elongation A50 18-20 %
Brinell Hardness 50-55 HB
PHYSICAL PROPERTIES
Density 2,67 g/cm³
Modul of Elasticity 70,000 N/mm²
Electrical Conductivity 19-21 m/Ω.mm²
Thermal Conductivity 130-150 W/m.K
Coefficient of Thermal Expansion 23,2 K-1.10-6
Spesific Heat Capacity 900 J/kg.K
TOLERANCES
Surface Roughness Ra 5-7 µm
Thickness (mm) +/- 0,3
Width & Length (mm) +/- 10
STANDART STOCK SIZES
Width x Length (mm) (1520x3020)
Thickness 3-100 (mm) 3 4 5 6 8 10 12 15 18 20 25 30 35 40 50 60 70 80 90 100
Thickness 100-600 (mm) Upon request
For non standart sizes please contact us.
EmpAL 5754 Brochure
PDF
1.84 Mb.